Our services
Powder coating in Brisbane
Advance Sprayers is a Dulux Accredited powder coater in Richlands, on Brisbane's southside. We powder coat steel and aluminium, from one-off parts to jobs 7.5 m long, with sand blasting and chromating on the same site.
Richlands, Brisbane
- Dulux Accredited
- Jobs up to 7.5 m
- Overhead conveyor line
We are committed to delivering high-quality workmanship consistently.
At Advance Sprayers, we are one of only a handful of applicators in South East QLD who are Dulux Accredited. Only Dulux Accredited Powder Coaters are able to issue Dulux warranties after demonstrating their capability to meet stringent quality conditions and international standards.
Our powder coating team is very experienced, with our two most senior coaters having more than 40 years experience between them.
We use state of the art equipment including GEMA electrostatic powder guns, two powder coating booths and two natural gas fired ovens.
While no job is too small, our large oven capacity allows us to coat jobs up to 7.5 m long. We can also handle large multiples using our overhead conveyor line.
Finishes
With access to Dulux, Akzo and Jotun products, we provide a wide range of finishes including:
- Comprehensive selection of colours
- Epoxy or polyester
- Smooth, textured or ripple effect
- Gloss, satin or matt finish
- Zinc-shield coating option for extra corrosion protection
At a glance
- Accreditation
- Dulux Accredited Powder Coater
- Maximum length
- 7.5 m
- Equipment
- GEMA electrostatic powder guns, two powder coating booths, two natural gas fired ovens
- Multiples
- Overhead conveyor line
- Powders
- Dulux, Akzo and Jotun
- Warranty
- Dulux warranties can be issued
What is powder coating?
Powder coating is a dry finishing process. Electrostatically charged particles of pigment and resin are sprayed onto metal that has been electrically earthed, so the powder is drawn to the surface. The item then goes into a curing oven, where the powder melts and fuses into a durable, decorative finish.
The finish resists chipping, scratching and fading, and comes in virtually any colour, in high and low gloss, textured, metallic and clear. There is very little waste, because dry overspray can be recovered.
Powder coating: questions we are asked
Are you Dulux Accredited?
Yes. We are one of only a handful of applicators in South East QLD who are Dulux Accredited. Only Dulux Accredited powder coaters are able to issue Dulux warranties, after showing they meet stringent quality conditions and international standards.
How long an item can you powder coat?
Our large oven capacity lets us coat jobs up to 7.5 m long. No job is too small, and large multiples go through on our overhead conveyor line.
Which finishes can you do?
Gloss, satin or matt; smooth, textured or ripple effect; epoxy or polyester; and a zinc-shield option for extra corrosion protection, in a comprehensive selection of colours from Dulux, Akzo and Jotun.
Do you sand blast before powder coating?
Steel is blasted in one of our two on-site rooms and coated within four hours, the limit the Australian Standard sets between blasting and coating. Aluminium is prepared by chromating instead.
Where are you?
Shed 2/577 Boundary Road, Richlands QLD 4077, on Brisbane's southside. Pick-up and delivery can be arranged.
Read the guides
Do you have to sandblast before powder coating?
Why steel is blasted first, and why the Australian Standard allows four hours between blasting and coating.
Read the guideCan you powder coat aluminium?
Yes, once it is chromated. How our six stage process prepares aluminium for powder coating.
Read the guidePowder coating or two pack paint?
When each one suits the job, from a workshop that does both.
Read the guide
Or talk to us
- Phone
- (07) 3375 4299
- Workshop
- Shed 2/577 Boundary Road, Richlands QLD 4077
Opening hours
| Monday to Thursday | 7am to 3pm |
|---|---|
| Friday | 7am to noon |
| Saturday and Sunday | Closed |